EMPEROL COLOURS PVT. LTD.
PU E  Finish Paint

PU E Finish Paint

Send Inquiry

With the help of our team of dexterous professionals, we manufacture and supply optimal quality Polyurethane paint. The offered paint is precisely processed using supreme quality polyurethane and advanced processing techniques. It is used to provide excellent finish on variety of substrate such as steel, Aluminum, FRP and other plastics, ply wood, hard wood concrete etc. Our quality experts firmly test this Polyurethane paint to ensure optimum quality. Furthermore, we offer this paint in various packaging option at reasonable prices.

Features:

  • Effectiveness 

  • Good chemical resistance

  • High viscosity 

  • Accurate composition

 

RECOMMENDED USAGE

Volume Solids

40 -45 %

Mixing Ratio

Base: Hardner

3 : 1 by volume

Recommended D.F.T.

40 - 50 microns

Theoretical Coverage at given D.F.T.

8.0-11.0 sq.mt/ltr

Technical Specifications

Type

Two Pack

Color

In desired shades.

Gloss

Glossy

Pot Life

4 - 6 hrs. at 30oC

Curing Mechanism

Solvent release and chemical reaction between Base and Hardner

Flash Point

Not below 25oC

Drying Time(30oC)


Surface Dry

Max. 1 hr

Hard Dry

16 - 18 hrs.

Re-coating Interval

Min 16 hrs.

Thinner

Emperol P.U.Thinner

Thinner Consumption Brush

0 - 5 %

Conventional Spray

5 - 15 %

Suitable Over-coating

Conventional, N.C., Acrylic, Chlorinated Rubber, Polyurethane etc.

 

Applied Over

Primed surface.

Application Method

Brush / conventional spray.

Shelf Life

6 months in a sealed container under normal storage conditions.

SURFACE PREPARATION

Primed surfaces must be clean, dry, and free from moisture, grease, and other contaminants.

SPECIAL INSTRUCTION

Thinner consumption may vary depending upon site conditions. Practical covering capacity depends on application techniques, ambient conditions, wastage, surface condition etc. Surface temperature must be 30C above Dew Point to prevent condensation.